How To Become More Self-Sufficient Without Starting a Full-Blown Farm…
Want to start preserving your harvest, making your own soap, or building a backyard root cellar — but not sure where to begin? “Homesteading Advice” gives you instant lifetime access to 35+ practical homesteading books on food preservation, veggie gardening, DIY natural cleaning products (save over $250 per year with this skill alone), brewing, off-grid energy, and a whole lot more…
Click Here To Check It Out Now!
This 7 part video series shows the conversion of a old unused ceiling fan into a power generator. Part One shows the dismantling of the ceiling fan and how to wire it up. Part Two shows how to insert a metal banding used for attaching the magnets around the stator. Part Three shows how to orient/place the magnets inside the ceiling fan housing to achieve a voltage reading. Part Four shows how to mount the face plate and create your own turbine blades. Part Five shows how to build the body to support the turbine. Part Six shows how to mount the turbine unit onto the body as well as partially lighting a CFL bulb with a quick spin. Part Seven is the final part that shows how to wire up the turbine to the diode bridge rectifier and taking it for it’s first flight…
1: Dismantling of the ceiling fan and how to wire it up…
2. How to insert a metal banding used for attaching the magnets around the stator…
3. How to orient/place the magnets inside the ceiling fan housing to achieve a voltage reading…
4. How to mount the face plate and create your own turbine blades…
5. How to build the body to support the turbine…
6. How to mount the turbine unit onto the body as well as partially lighting a CFL bulb with a quick spin…
7. The final part that shows how to wire up the turbine to the diode bridge rectifier and taking it for it’s first flight..
If you like this idea, be sure to share it with your friends and inspire someone you know. Anything becomes possible with just a little inspiration…
